ScottyWarpNine
Mostly Harmless
FREE! 12' Giant DC-3 Foamy and $150 1/4 Scale Sig Piper Cub
Sadly, I have to sell my two big birds. In addition to not having time to work on them and complete them, I am moving into an apartment this summer and I won't have space for them. I'd like to sell them to someone who will be able to complete them and enjoy them.
The 1/8 scale DC-3 is a foamy based on Zirolli scale plans. The build thread is here, but if you have any specific questions please let me know. comes with two 100A ESCs, two big outrunner motors, two 16" three blade Master Airscrew propellers, two air filled Dubro wheels, and an assortment of high torque servos. Has some hanger rash. Left horizontal stabilizer is intact and will need to be attached and glassed. Some other surfaces still need to be glassed and smoothed. Needs a lot of finishing work.
The cub is very nearly finished. I have covered the wings and elevator, but the rest of it still needs to be covered. Includes enough silver Solartex fabric covering to do the whole model. Silver because I intended to make it a "Flitfire" replica. Also includes a 100A ESC, a big outrunner, two air inflated Dubro tires, and the necessary servos. Also includes floats that are built up and ready to finish. I have the boxes and instructions for the plane and the floats. Also includes a sweet built up wood dummy engine. Has one small tear in wing covering near tip.
I would like $150 for each. I also have two 6s 10,000mAh packs that I will sell separately for $40 each. Feel free to make an offer. I am located in Northeast Ohio in the Akron area.
Thank you very much for looking. I'm not getting out of the hobby, just downsizing, so I hope to still enjoy it at a smaller scale with renewed passion.
EDIT: The DC-3 is free for anybody who wants it, Motors and ESCs not included!
Sadly, I have to sell my two big birds. In addition to not having time to work on them and complete them, I am moving into an apartment this summer and I won't have space for them. I'd like to sell them to someone who will be able to complete them and enjoy them.
The 1/8 scale DC-3 is a foamy based on Zirolli scale plans. The build thread is here, but if you have any specific questions please let me know. comes with two 100A ESCs, two big outrunner motors, two 16" three blade Master Airscrew propellers, two air filled Dubro wheels, and an assortment of high torque servos. Has some hanger rash. Left horizontal stabilizer is intact and will need to be attached and glassed. Some other surfaces still need to be glassed and smoothed. Needs a lot of finishing work.
The cub is very nearly finished. I have covered the wings and elevator, but the rest of it still needs to be covered. Includes enough silver Solartex fabric covering to do the whole model. Silver because I intended to make it a "Flitfire" replica. Also includes a 100A ESC, a big outrunner, two air inflated Dubro tires, and the necessary servos. Also includes floats that are built up and ready to finish. I have the boxes and instructions for the plane and the floats. Also includes a sweet built up wood dummy engine. Has one small tear in wing covering near tip.
I would like $150 for each. I also have two 6s 10,000mAh packs that I will sell separately for $40 each. Feel free to make an offer. I am located in Northeast Ohio in the Akron area.
Thank you very much for looking. I'm not getting out of the hobby, just downsizing, so I hope to still enjoy it at a smaller scale with renewed passion.
EDIT: The DC-3 is free for anybody who wants it, Motors and ESCs not included!
Last edited:
