DavidAussie1966
Junior Member
Hello to all David < Newbie to Forums, I have a Beef motor set up in the FT-3D and at full throttle position the motor is cutting in and out and runs slower ? is this some over speed protection , then does this mean that my initial throttle set up with the transmitter and receiver is not correct , I turn the transmitter on with the throttle in full position and then connect power to the plane and wait for the beeps then move the throttle stick back down to off position ,then when I try the throttle it works but at near or at full power it starts cutting in and out and the motor runs slower , ty for any help from any one that can help with this problem I am having here