voipmonkey
Senior Member
Hi Guys
thought i would start a new thread for the progress of my quad build, soon after my tri build (Still tweaking this) i finally started my QuadX build.
Simple 3mm Ply and 15mm x 15mm Arms. I have made this quite small as i want something to challenge me when flying.
The arm lengths are all 12"(305mm) keeping the frame quite small.
Centre Plates 1
Centre Plates 2
Main Frame
let me know your thoughts will get motors added soon not sure how to mount them yet (Bolt or Tie Wrap)
and i am still building the Wii Based flight controller (All parts not here yet)
I am going to use a MWC Shield from Flyduino and a Arduino Pro Mini for this build. I have a Nano V3.0 but pins are not right for the Shield so i think this may become my tri control board (Own Shield) if this works
Mark
thought i would start a new thread for the progress of my quad build, soon after my tri build (Still tweaking this) i finally started my QuadX build.
Simple 3mm Ply and 15mm x 15mm Arms. I have made this quite small as i want something to challenge me when flying.
The arm lengths are all 12"(305mm) keeping the frame quite small.
Centre Plates 1
Centre Plates 2
Main Frame
let me know your thoughts will get motors added soon not sure how to mount them yet (Bolt or Tie Wrap)
and i am still building the Wii Based flight controller (All parts not here yet)
I am going to use a MWC Shield from Flyduino and a Arduino Pro Mini for this build. I have a Nano V3.0 but pins are not right for the Shield so i think this may become my tri control board (Own Shield) if this works
Mark