luketheduke
New member
Hi All,
Thanks first of all for all you do to get us newbs up in the air! I am building my second quad from scratch this time. I used the mini racing quad power pack for electronics with a Naze32 Acro and a homebrew H frame. I built a tether that supplies 12.6V/30A to an XT60 plugged into the quad. Besides a little issue with two of the escs(That's another thread...), it has been all good. For testing I have it hooked up to two ropes so it can only go up and down. I've told myself that I won't take it off till it will fly for 10 minutes with no gimmicks. I recorded this video on one of my flights and this repeatedly happens: https://www.youtube.com/watch?v=xP-ijypL81I The quad will take off normally in Angle mode then about three minutes into flight, the quad will rapidly start to wobble and lose altitude. I have tried to increase the throttle but that doesn't seem to do anything. Any ideas? I'm flying the latest version of Cleanflight.
Thanks,
luketheduke
Thanks first of all for all you do to get us newbs up in the air! I am building my second quad from scratch this time. I used the mini racing quad power pack for electronics with a Naze32 Acro and a homebrew H frame. I built a tether that supplies 12.6V/30A to an XT60 plugged into the quad. Besides a little issue with two of the escs(That's another thread...), it has been all good. For testing I have it hooked up to two ropes so it can only go up and down. I've told myself that I won't take it off till it will fly for 10 minutes with no gimmicks. I recorded this video on one of my flights and this repeatedly happens: https://www.youtube.com/watch?v=xP-ijypL81I The quad will take off normally in Angle mode then about three minutes into flight, the quad will rapidly start to wobble and lose altitude. I have tried to increase the throttle but that doesn't seem to do anything. Any ideas? I'm flying the latest version of Cleanflight.
Thanks,
luketheduke