I scaled up another FT Spitire, this time to a 1350 wingspan with landing gear.
It had its maiden on Sunday, plane came back in one piece, but had a few problems, first off i'm not sure the motor is working properly, seems to be not very linear, its from a trainstar tough trainer, and has always felt a bit on/off but seems to be worse now since it was up a tree
Second problem was I had forgotten to screw the servo arms in, so had no rudder to start with, the combination of an unconnected rudder flapping about and too much throw all round made it pretty scary to fly
Connected the rudder and lowered the throws and flew much better.
Hopefully can Re-maiden on friday with new motor and everything connected