dropkickjohny
Are you cool, man?
Hello Everyone,
I picked up an ARF kit of the ZMR180 from FPVmodel.com come a couple of weeks ago. Truth be told, I have no idea where the original ZMR250 orginated from or from whom. I do know the FPVmodel sells the "version 2" of the ZMR250 so I suppose they get to be the ZMR people at the moment. Anyway, this is about the ZMR180. Here is what was included in the kit that I got:
My build turned out slightly different due to the PowerOSD I had been meaning to use on something. Ripping the PPM solder pad of the Naze Acro forced me to use Swift32 board I had kicking around. Finally, black nylon standoffs, just for stealth bling. I flashed the ESCs with the latest BLHeli firmware so I could give BorrisB's Betaflight a go. The video below is from the FPV maiden flight with the stock PIDs from PID controller 1.
Anyone else have a ZMR180?
I picked up an ARF kit of the ZMR180 from FPVmodel.com come a couple of weeks ago. Truth be told, I have no idea where the original ZMR250 orginated from or from whom. I do know the FPVmodel sells the "version 2" of the ZMR250 so I suppose they get to be the ZMR people at the moment. Anyway, this is about the ZMR180. Here is what was included in the kit that I got:
- ZMR180 frame [m3 motor mounts for 22xx motors]
- 4X FPVmodel 2204 2300kv motors
- 4X DYS SN20A with SImonK Firware
- PDB with 12v and 5v BECs
- 2X Sets of Dragon Fly 4045 Bull nose props
- Naze32 Acro
My build turned out slightly different due to the PowerOSD I had been meaning to use on something. Ripping the PPM solder pad of the Naze Acro forced me to use Swift32 board I had kicking around. Finally, black nylon standoffs, just for stealth bling. I flashed the ESCs with the latest BLHeli firmware so I could give BorrisB's Betaflight a go. The video below is from the FPV maiden flight with the stock PIDs from PID controller 1.
Anyone else have a ZMR180?