drone

Hello! I just got the Tinyhawk 2 drone and binded it to a taranis x7s q. I am a newbie and have been doing my first flights, but see that my controller goes from 8v to 6v in less than ten minutes. Is that usual or am I doing something wrong? Tips about charging? I also attached photos of the...

Hi All, Just thinking out loud about the upcoming demise of our hobby as a result of over-regulation due to the rise in self-flying 'drones.' What if a distinction could be made in any of the legislation between RC aircraft and these self-flying drones that anyone can get at walmart? There is...

I just bought a Eachine Tyro 89 and I already have a Spektrum Dxe. I'm looking for a cheaper (~15-20$) rx that'll work with both...

Hi everybody, i just moved to annville PA, and I'm looking for some places to fly some freestyle fpv with my drone within 50 miles of here. If there is anybody in this area and knows of some good bandos/ open fields, etc.. then I'd love to meetup and fly together.

Hello guys, I have a RAY GW198 GPS drone. It came with standard nose props shown in the first pic below. And I found a excellent deal on FVE OCDAY Black 6045 Bull Nose Strengthened Propeller CCW CW for 250/280 Race Drone in the second pic in the same size. Is there and draw back or plus on...

In anticipation of SpaceX's sn8 15km starship hop, I've decided to start my own space program;) First up, we need to start small, so I'll be building the famous 'starhopper' vehicle: After this, I would like to move to a full 'starship' that can fly up vertically, parachute down, then land...

This is a 40mm cinewhoop. it runs off tiny whoop sized motors with 8.5mm mounting holes and a 16x16 FC. It's a pusher, so you print it upside down. there is three parts- the spacers, the top plate, and the main frame. you need to print four spacers. otherwise, i would print it in 50+ infill and...

Hey Everyone, I've been working on a project over lockdown and thought I would share it with you all, hopefully it will be of interest to a few! I've been tinkering with Arudino boards now for a few years and one project I wanted to try was the balancing robot. This looked cool but I thought...

So I had an idea to take the hunter killer drone score streak from call of duty and turn it into a real life RC plane. I loved the design and I thought it would be a fun and challenging build for my first edf build. My original plans to make a folding wing like the original one The real in game...

This was a late evening flight a few years ago when my 1st drone, Syma x8, lost signal and began plummeting to the ground (in the dark :( ) BUT please don't berate me! This was a long while ago, before Gatwick, before the Drone code and everything else that has happened since. In any...

Hello. How do I connect and set up smart audio/camera control with my drone? I have a Runcam micro swift 3 camera, a Synergy f4 flight controller, and a TBS unify pro V3 VTX. I can't seem to get the video working. I have 5V, ground, and video hooked up to ground 5 volts and Cam in on the fc but...

Hello. First of all, I am new to this forum and I hope I post this thread at the correct place... :rolleyes: I just picked up a "scratch built" drone and I have no clue whatsoever about what all the components are. I have flown a lot of RC planes, so I am not new to the RC hobby. But, I have...

One of my favorite on how they fly the ft arrow and a cheese drone

I'm new to fpv and I'm currently planning on building out a project where I need HDMI video out. What I'm finding is that most things fpv are analog with only HDMI in on goggles, unless you're going with something like lightbridge, but then you're limited to only flying dji gear right? I have a...

long time no new edit, this time full in tried too at some sound design (not perfect) just started with this new side of video editing, but some awesome footage out of the last weeks hope you like it.

Hi, I am currently building a drone with Arduino. I bought the FS-T6 as transmitter it come with a FS-R6B receiver. I am having trouble getting the endpoint to between 1000 and 2000. No matter how I adjust the endpoints, they still stayed around 700 - 1000. Is there a solution for this? Thanks...

Ive been into fpv for 2 years now but recently had an accident where my right hand thumb had to get amputated. My right hand is non-functinal. Ive looked all over for a solution so i can fly my quadcopters with 1hand. I saw a post where someone used a joystick and modified thrir transmitter. I...

So I was flying it yesterday and everything was alright. I didn't crash it and got some great footage. Anyway, today I took it to a park and tried to fly it. I was surprised when it armed and everything, but the motors didn't spin. I went onto betaflight and all the settings are the same...

The weather throughout the week was just catastrophic, only rain and clouds and hardly any sun, but we decided to fly with our FPV Race Drones anyway because there is no bad weather just the wrong equipment.

Hello, I have just built my own drone using a Pixhawk 2.4.6 from mRobotics. I did all the firmware calibrating and stuff, but I’m getting a preflight error on mission planner. It looks like everyone had had a similar problem but the solutions aren’t working for me. This is for a multicopter and...