I have one of these bevel cutters and it works really well. I've never really liked A and B folds so for my next plane (a pusher Hangar Simple Stick with FPV) I thought I would just cut bevels for the square profile body and fold it up. It sure was quicker and easier to build. Has anyone else...
Free plans and information at 13thsquadron.com
Check out our Facebook group: 13th Squadron
The 13th Squadron Mini Zero is an extremely versatile aircraft capable of flying fast, slow, turning and burning, or for cruising around on a calm evening. You can take it anywhere because it has a 30"...
I am a huge fan of the Macchi M.5 it is a beautiful plane and I love it so much so I decided to make a mini m.5. This is the plane I am trying to make. I found some perfect balsa plans for it so yesterday I tried to do a one day build to make one. Here is the link. I started with cutting out the...
FT Mini Guinea
Designed By: Peter Sripol
Plans By: Dan Sponholz
Description:
The FT Mini Guinea is a small twin with a big personality. Now made with Master Foam this plane offers so much versatility it is insane! Whether you are a beginner looking to build your first twin or you are an...
This should be an interesting build off to see what is possible with foam board. Personally, I find 3d and XA to be very fun, but extremely expensive. Even a ~50" airframe can run you up to 200$- not including electronics. Wouldn't it be great if we could build our own airframes for less than...
Here is the Beta 1 version of the EZ Intruder! Great back yard or indoor flyer.
These are BETA plans for the EZ Intruder. This model airplane is designed to use the Flite Test 2CH EZ Power Pack available on the Flite Test store.
The aircraft is designed to use Flite Test Maker Foam or...
FT Guinea Pig
Designed By: Peter Sripol
Plans By: Dan Sponholz
Description:
The Flite Test Guinea Pig is the perfect platform to carry out the craziest experiments in the air. While it can carry a hefty payload, which can be dropped out the rear hatch, it can also be set up to carry out...
I did a good amount of work on the 12ft glider I have a 8ft stick on the end of it is a wooden plate bolted to the stick under a casing, and then the plate is glued to the vert. stab. then on top of the casing there is a 15" horisontail stabilizer with 2 1/2" dowels on the sides for support. If...
VP SideWinder
Sponsored by Venom Power
Designed By: Dan Sponholz
Plans By: Dan Sponholz
Skins By: Stephen Rosema
Description:
Power Pack Compatibility:
Power Pack C
Specs:
Wingspan:
Center of Gravity:
Control Surface Throws:
Expo Suggestions:
Free Plans: Click the Download...
Hi there!
Im in South Africa, and plunged right in and bought 5 large sheets of 5mm foamboard. Then I built a Simple Scout as my first build, to become acquainted with the FT build tecniques. All went well, but the CG was WAY out, so after reading the forums, I designed an extension to the nose...
I have always been intrigued by this aircraft. To think Chuck Yeager strapped himself (with busted ribs) into a rocket powered, bullet shaped glider, that was then dropped from a B-29 over a desolate region of the United States to attempt to break the sound barrier in level flight in 1947 and...