quad

Epic little frame! Quite an experience running into a tree like that! Messed around in After Effects to edit the footage :D Hope you like it!

Hey there! New to RC here, trying to start by buiding a quad with electrohub. I figured this would be the place to ask. My question is about the Simple motor mount discs at the flitetest store. It's not clear (except for the picture) how many discs and bolts come with each package. The...

I've been flying quadrotors for about a year now and recently tried to design one and build it up. I'm having a hell of a time with my estimated flight times. No matter what combination of motors and props, I can't get my average flight time over 7 minutes. My plan is to make a multirotor that...

Hi everyone So i've just build my first quad following the Flitetest H-quad plans. The only difference is that i'm using the Multiwii pro with GPS board for control. My problem is that i can't get the board to recognize anything from my transmitter. I know the transmitter/receiver works fine...

adhesive does just fine just kidding, I am waiting for next paycheck

I am currently re-building a quad from whats left of my any copter hub. I was flying on the KK2 board and had good success, but crashed and am starting from new. My quad is larger than most commercially avail quads with 650mm between each motor. I built it bigger for more stability with the...

Hi Im building a Knuckle H-quad, this is my first aircraft build. I am still waiting for my esc's and motors to come in the mail. The only thing i have doubts about is what configuration i need to chose on my kk2.1 board (X, H6, H4???). I also don't know what settings i need for roll/pitch, yaw...

Hello pilots, I need some help choosing some alternative motors for the Blackout Mini H Quad. The ones on the Blackout site are $43 dollars a piece! Any suggestions?

Hi- Built a quad anycopter and having a hard time with dialing in and making the quad stable. Looking for a couple different profiles, one for stable flight to shoot video and one for more fun flying. Would anyone mind sharing their PID and Stick Scaling numbers?

It's about easter, and there is nothing better that a FPV egg hunt! I was thinking that each person would fly around (maybe in a forest or something) and look for eggs. I was going to suggest somehow picking them up and returning them to their basket, but.. blah. So anyway, Yeah!:rolleyes:

I would like some advice on this quad design. I have been flying fpv with a tricopter and I am wanting to build a quad. I plan on putting a brushless gimbal on it eventually. I am going to build this out of g10 glass fiber and 1/2" booms. Any advice would be greatly appreciated.

I've been getting ever so close to getting my tri (now Quad) in the air for more than 10 seconds...controlled. I switched props and went from an 8inch 4.5 to an 8inch 3.8 and that made a huge difference and there is a lot less vibration. My issue with the quad and the same as tri, is getting...

how do you guys balance a square quad? I always thought that balancing diagonally prop to prop was the right way to do it but i'm struggling getting the yaw to be stable. Im getting some wobbling when yawing quickly. Is this normal with a quad or should i be getting a smooth stable yaw even...

One of my co-workers just posted this link to one of our internal mailing lists. http://www.dolphinsafari.com/whale-watching-captain-films-with-drones-dolphin-stampede-whales-dana-point It's a fine example of a productive use of 'drones' or 'UAVs' to observe things that would normally not be...

Hi, I'm working on an completely geniune DJI Flame Wheel F450 at the moment, so using the DJI 2212 engines, though I noticed just one feels, different. Not overtightened or bad, just different. Most notable when mounting the propellers and gently pushing them with your finger, the other three...

I want to start flying quads and was wandering if the Knuckle H-Quad kit or the Anycopter Quad kit would be the best? ;)

I think I've done everything and all it does is flip over. NTM Prop Drive 800 kV motors 4x Afro ESC 20amp 4x Hobbyking i86 Lite Contorl Board (KK2 was out of stock) nano-tech 3300 mah 3s lipo TGY 9x tX and rx Knuckle H quad frame Calibrated my ESCs, once manually, once through the control...

Hi all; long time lurker, first time poster here :cool: Watching the FliteTest channel on YouTube got me really interested in Quadcopters, to the point where I'm now looking into building one for myself. I'm putting together a parts list loosely based on the build articles and parts...

This guys filmed a fireworks display using his quad while the quad was right in the middle of some fireworks, pretty neat: https://vimeo.com/52961424

Heya, support has been awesome on this forum, so I'm going on ahead and shoot another question. :D My Quad shakes quite violently when coming down, spectators always go: "Go higher!" And I don't mind making them happy, but when I wish to get the Quad back down again, it shakes eerily violent...