1. FoamyDM

    FTFC20 - Build-ruary Challenge by FoamyDM

    1) FTFC20: Build-ruary by @FoamyDM (Build Skill: 4 Skilled, Pilot Skill: 3 Amatuer) 1. FT - Arrow 2. Mehve 3. FT-P-38 Master Series 4. FT-Corsair Master Series
  2. FoamyDM

    Plane FoamyDM - Luscombe Silvaire 1.0

    INSPIRATION I was asked to try my hand at designing the Luscombe Silvaire from a forum friend, @kilroy07 . He explained how he loved and hated this plane. He loved it for the memories he has with his father in it (see below), but he hated the elbow grease required to shine this beaut' up...
  3. AircPirateNinsei

    Plane AP ARGUS 2020-01-31 | Version 1.1

    A foamboard recreation of the Argus (Greek God of the Sky) by Steve Wooley (1961): Build Plan & Build Guide available! Follow the support URL and watch the thread for more updates about the design. GENERAL SPECIFICATIONS WINGSPAN: 1100 mm | 43.31 in LENGTH: 810 mm | 31.89 in CG: 40 mm | 1.57...
  4. DutchRoll

    FTFC20-Build-Ruary: Main Entry by DutchRoll

    Build Skill: 2, Pilot Skill: 0.75 (Crashed 8 times, max distance 3/4 of a circuit, no landings) FT-Mini Tiny Trainer - Cause my Simple Soarer died before it even lived. Build Photos FT-Mini Corsair - I want a warbird, and I need practice with round fuselages Build Photos FT-Bloody Wonder -...
  5. FoamyDM

    Plane Foamy WindFreak by FoamyDM 1.01

    WHAT A PLANK - The Foamy WindFreak Super Freak, Super Freak, it's Windy-Freakin' This Plank is nearly ALL wing. With an incredibly light loading, once this is in the air, it will spend all day catching thermals. This is designed as a bungee launch, or towed glider, however, It would be easy to...
  6. FoamyDM

    Plane Foamy Bird Of Time 1.0

    The Bird of Time: If you have seen This video, or one like it: You may have suddenly been on the hunt for one. When I did, It was out of stock (never to return) ARFs and plans, but no kits. After a while, I gave up looking and thought... I bet I can make this from Foam Board. This also fit...
  7. mayan

    Plane F-111 1

    An awesome project to do with the kids or just to play around with. Attached is 3mm FB plans, 5mm FB plans will follow and be a bit different though. EDIT: The fuselage is built out of 2 pieces glued together.
  8. Matagami Designs

    Plane Bellanca Aircruiser C27-A 2.1 M

    A foamboard recreation of the Bellanca Aircruiser C27-A originally found in a 1934 edition of Popular Aviation. Four channel plane using Flite Test 'C' power pack W/ 1800 mAh battery. 6 sheets, 31 Oz all up weight with a 50" wing span and 30" in length. 9.46 oz/sqft wing loading and WCL of...
  9. FoamyDM

    FTFC20 - Build-Ruary (Build Challenge)

    February is FT-Build-Ruary Month! Hi All, Lets welcome another flying season, ready to go! I challenge all here to turn February into FT-Build-Ruary So Many Planes So Little Time: I, like most folk in this community, have a LONG build list of planes I would LOVE to build. In the last couple...
  10. PlanesGuy888

    FTFC20 Spitfire Mk.I designed by PlanesGuy888

    For the FTFC20 build challenge, I decided that I would like to participate this year with an aircraft of my own. I chose the Spitfire Mk.I because it has always been a favorite of mine and I have always loved the look. This Spitfire is not going to be a normal FT Spitfire though. It has been...
  11. FoamyDM

    FTFC20 Remington Burnelli 2 designed by FoamyDM and Jpot1

    The Remington Bernelli RB-2 INSPIRATION I watched this video... (Starting at the plane of interest) Then was tickled by the flying Camper look to it. (I am gearing up to head out on a camping trip this weekend) HISTORY From Wiki: The Burnelli RB-1, often known as the Remington-Burnelli...
  12. FoamyDM

    Plane FoamyDM - Burgess-Dunne Flying Wing 1.0

    YOU NEED TO BUILD THIS FLYING WING: This project is a Great Flyer, Quick Build and only 2 sheet! This Project was inspired by the '20 Flite Test Forum Challenge (FTFC20). Since I have seen the model on Fidder's green, I thought the Burgess-Dunne Flying wing from 1914 is a perfect candidate for...
  13. Zephyr1

    FTFC20 SPAD XIII designed by Zephyr1

    My entry into this challenge will be a Spad XIII. The initial plans call for a 30in wingspan, and that's what I am going to be doing initially. However I do plan on scaling it up to near a 40in wingspan in line with Ben's PT-17. I usually design a lot of EDFs, so it will be fun to do something...
  14. FoamyDM

    FTFC20 Mara designed by FoamyDM - The Flying Mustache

    This the entry of the MARA designed by FoamyDM The graceful swept curves of this Thermal Soarer are enticing, I am drawn to the unique construction methods employed to build this unique craft. History: The craft was designed in 1999 by Markku Tähkäpää, reknown veteran Finnish modeler. but...
  15. Matagami Designs

    FTFC20 Bellanca Aircruiser C-27A by Matagami Designs

    @rockyboy Here is the build thread for my FTFC20 submission for the Bellanca Aircruiser C-27A. I became interested in this plane a few weeks ago when i visited the USAF museum and took a quick picture of a small model on display which caught my eye because of the way the landing gear...
  16. FoamyDM

    FTFC20 Minimoa designed by FoamyDM

    I really love the Gull-wing style design of the Minimoa which is a German Sailplane. They come in many sizes; 104" 99" 72" 50" 35" and 34". I will base mine on the Minimoa 50 (plans depicted below.) The Göppingen-gö-3 "Minimoa" is a the famous 1930s German sailplane designed be the team of...
  17. jpot1

    FTFC20 Astron 40 designed by jpot1

    I stumbled across this on outerzone a while back while researching information to try an build an x-wing plane. This challenge is the perfect excuse to get me to get moving on it! I will be targeting C pack electronics and will probably shrink the size from about 40" shown in the picture below...
  18. Mr. Gandalf

    FTFC20 Guillows #303 Super Cub designed by Mr. Gandalf

    This is the first forum challenge I will have participated in and I am very excited to get started, but first here is some history of the balsa model! The balsa kit was pretty small with a wingspan of 24". Designed for rubber powered free flight, or control line with a glow engine, It was built...
  19. FoamyDM

    PRANDTL-D Foam Board Wing by FoamyDM

    This is Reserved for my Attempt to build a PRANDTL WIng as featured on an FTCC when they spoke with NASA engineer. The one that flies with *proverse* Yaw I looking into it here: http://www.amaflightschool.org/PRANDTL and https://www.nasa.gov/centers/armstrong/news/FactSheets/FS-106-AFRC.html...
  20. FoamyDM

    FTFC20 - Vought OS2U-3 "Kingfisher" by FoamyDM

    Inspiration: During Family Day Trip to Wilmington, NC with my Mother, Step-Father and Sons, we stopped in to U.S.S. North Carolina. a WWII Battleship. Something I had passed EVERY time I went to Wilmington over the years living in NC. As the morning was cloudy and a bit rainy, it was a perfect...