taranis

Hello all, I’m new to the flight community, and started my first build with an fpv 5inch quad. I have been struggling to bind my transmitter and receiver and would love another set of eyes on what I’m doing. I have the taranis qx7 access transmitter, a speedybee f405 fc, and the frsky R-XSR. I...

So I just resolved a very bizarre issue. When storing my qx7 in it's carrying case (harbor freight foam filled metal case), I heard my radio turn on........Odd. Upon further inspection, just applying pressure anywhere to the shell or radio body I could boot up the Tx. While flying I would hear...

This is my first time performing Hydrodipping on my Flysky FS-I6, which explains the poor transfer on the back of the TX. Nonetheless, this weekend project was inspired and motivated by Fuzzy Whumpkin from this...

Ok my son and I are building a gremlin. Here is the situation. The receiver is bound to the transmitter but when we plug in to beta flight the receiver and flight controller seem to be connected as in if you move the FC board the animated drone in beta flight moves with it but the transmitter...

Hi all! I’ve recently purchased a newbee drone which requires D8 mode. I’ve watched many videos on flashing new firmware on to the radio, which hasn’t been successful in terms of reactivating D8 mode. Apparently it’s been turned off and by not checking the eu box before flashing allows you to...

I've been using the irangex IRX4+ for a little over a year with my X7 to use spektrum gear and I figured I'd share what I've learned in that year. I'm no programmer, I try to avoid that stuff, so I can't get into the firmware. The most important thing to do when using this module is to change...

Wha?? :unsure: Lemme break it down: OpenTX - the software that runs FrSky on and some other radios Pattern - a series of aerobatic maneuvers performed in a specific order for a competition Sequence Caller - an assistant who stands near the pilot and calls out the next maneuver in the sequence...

hi everyone. ı try to bim my xm+ receiver with my taranis but receiver always has solid red and green lihgts so ı try to flash my receiver but ı always get module not responding error . how can ı fix this problem. ı tried all firmwares for xm+ like lbt or fcc but it didint work. please help me

Hey everyone! I’m realitively new to fixed wing stuff, and have a (hopefully) quick question I’m looking into getting the SE5 build kit with Power Pack F but I don’t know which reciever I should get I’m running an FrSky Taranis QX7 radio Thanks for the help! 💜

hello! i made this account after days of searching online with no luck. i'm trying to make voice alert for low RSSI in my taranis x7 but there's no such option. i've updated the firmware, i've searched new sensors in telemetry tab. i updated my receiver (frsky xm+). betaflight shows RSSI like it...

Hey Flite Test enthusiasts! For all Taranis X9D AND Q X7 fans out there that want a little Flite Test touch to their radio, you're in luck! I created a Flite Test Splash Screen that will be shown everytime you boot up your transmitter! Here is the file for the Taranis X9D & X9D+ Splash...

Hi all, First post, still just starting out training on my Seagull Boomerang II 40 and a borrowed Spectrum DX7. Still indecisive on which TX to get myself. My Daughter (5 1/2 y/o) is dead keen to learn to fly and I want to get her a Bixler 3 for Christmas. Now she is tiny, and struggles with...

I have a Taranis Q X7 that I use to fly my race quads and tiny whoop. I noticed the problem when flying my tiny whoop, after flying forward for a while, it would start to go to the left or right. So I've narrowed it down the the transmitter. When ever I move the pitch forward or backward, the...

The SxR (S6R & S8R) receivers provide stabilization, level, knife edge and hover flight modes. Setup instructions and tips for the SxR have been gathered from a number of different sources and put in a blog post. Check out the blog post and video. https://youtu.be/XIe9nsuOJtU...

In RF D16 mode 16 channels are transmitted if the channel range is set to 1-16. The bind option determines if the servo pins are mapped to the first 8 channels or the second 8 channels. Further it also determines if telemetry from the receiver is turned on or off. This is useful when using two...

Which transmitter should I buy? That is a question often asked and understandably so. This hobby has historically been cost prohibitive for many and the transmitters alone are a large part of the investment. Therefore, some forum members have assembled the most recommended transmitters...

This script mimics the start sequence for quad racing. Pilots get their quads ready on the start line. They then return to their seats and get ready to race. The race official tells them to arm their quads and then after a random delay sounds a start buzzer. To use the script: The pilot...

I can get the Inductrix to bind but I have no control over anything. I disabled the internal rf and am using external PPM. Anybody do this successfully yet? I am using the single blinking mode on the OrangeRX to bind. I think I am doing everything right and I have played with the PPM frame rate...

Hey guys, I just wanted to say hello and give a brief bio about myself. I love any type of rc machinery. I bought (AND still have) Real Flight G2 with the USB controller about 13-14 years ago. I love the idea of flight and dreamed of flying! Fast forward to 2014 my friend (Rick) bought the DJI...

I have published an OpenTX Manual with help from the developers and community members. The manual is accessible by going to RCdiy.ca and clicking the OpenTX Manual link on the top menu bar. http://rcdiy.ca There are a number of ways to use this manual using the OpenTX Manual links on the right...