taranis

I have published an OpenTX Manual with help from the developers and community members. The manual is accessible by going to RCdiy.ca and clicking the OpenTX Manual link on the top menu bar. http://rcdiy.ca There are a number of ways to use this manual using the OpenTX Manual links on the right...

I have published two new videos and documentation on setting up OpenTX to display Head Speed. Head Speed By Configuring An OpenTX RPM Sensor http://rcdiy.ca/heli-head-speed-sensor/ https://www.youtube.com/watch?v=hdnJ-Ml94w0&feature=youtu.be Head Speed Using A Lua Script...

Hello there! This is like 7th place I post this in. I have read every single google link with related keywords. No answer. At this point im exhausted, and have'nt even tasted RC hobby yet. So two weeks ago I received my QX7 Taranis. I had also ordered a XSR-E receiver for it. As soon as I got...

I have published a new video and documentation on setting up the FrSKY RPM sensor in OpenTX. This is a precursor to the video on a lua script that calculates head speed. The script has been contributed by Attitude RC. Blog Post http://rcdiy.ca/frsky-rpm-sensor/ Video https://youtu.be/A3AlY6spy_Y

I had a lot of trouble with interference this year at flite fest east. Last year I had very little trouble, I even flew in the world record flight. This year I crashed repeatedly. I was using orange recievers, but I went to the store and bought spektrum recievers. This didn't seem to help...

So I'm absolutely a noob but have become semi efficient with OpenTx 2.2.0. thanks to the wonderful inter webs and Youtube. I actually managed to setup a secondary arming safety so that if my arm switch is flipped the throttle has to return to -100 before it will arm. That was a fun adventure but...

I cannot seem to bind my Taranis to my receiver. I've detailed what I'm doing in the videos below. Hopefully someone can help me out here, as I have no idea... https://youtu.be/nFlZNiAYh7A https://youtu.be/6gFx_DZS2zs

A new playlist consisting of 6 videos has been published. These videos accompany documentation written and updated by me in a blog post and the official OpenTX GitBooks manual. Blog Post http://rcdiy.ca/opentx-sounds-announcements/ Documentation...

Hi Guys, I am very frustrated. I tried almost the solutions possible but is not possible to bind my brand new Vortex 150 with Taranis X9 Plus. I explain all test I did: 1) The model comes with receiver mode auto in OSD I'll saw continuously changing mode but without find the Taranis; 2) Tried to...

Instructions http://rcdiy.ca/taranis-opentx-s-port-firmware-flashing/

OpenTX 2.2 has been released! I’ve produced a blog post and video that goes over - Installing the microSD Card - Connecting the Tx & Computer - Downloading, installing & Configuring Companion - Backing Up The Tx - Downloading & Writing OpenTX To The Tx - Downloading & Copying The SD Card...

Aloft Hobbies has a NiMH Charging Kit for the Taranis Q X7. I’ve installed in mine and have documented the steps in a blog post and video. http://rcdiy.ca/taranis-q-x7-nimh-charging-kit-aloft-hobbies/ https://youtu.be/P8JQkIlSbhs Check out the blog post and video. Stay Safe & Have Fun

I recently bought my Q X7 and am curious if I can bind it to the Gremlin's recommended Spectrum receiver?

I'm a bit of a newbie and i'm having some issues with my taranis i recently picked up. It works perfectly in simulators, its bound correctly to a frsky xm+(atleast the steady green light is showing), but rates are not shown in cleanflight. In cleanflight i've set Reciver to serial-based reciver...

I am looking for something like the Spektrum DX5e or anything similar that is full range. I need it for a mod. I am building a module for the Taranis to use DSM2 and DSMX. thanks!

http://rcdiy.ca/gps-directions-home/ https://www.youtube.com/watch?v=Cb7SlKAHbFU This GPS script was published last year. A viewer requested that the script be updated to use an optional second GPS sensors. One on the aircraft and another in the transmitter. This allows a pilot who does cross...

Hello everyone, I'm having trouble binding my Taranis Q X7 with an XM receiver. I followed what I thought was the proper sequence. Transmitter on, then found an open receiver space, presses [Bnd], and heard the chirps coming from the transmitter. Then I held down the bind button on the receiver...

Hey Flitetest-friends:) I am visiting Flitefest West this year. I am superexcited but I have one little problem. I am from germany and need to bring a lot of stuff for a camping trip that I am doing after flitefest. And since I wanted to either upgrade my Transmitter module from a FRSKY DJT to...

http://rcdiy.ca/taranis-two-gps-sensors/ https://www.youtube.com/watch?v=U4EcBQh_mzE OpenTX allows the use of two GPS sensors. So by adding a GPS to the transmitter’s module bay one can track both the pilot’s and the model’s position. This video and post will be followed by videos and post on...

Taranis Q X7 OpenTX Battery Capacity Remaining Lua Script http://rcdiy.ca/battery-capacity-remaining/ https://youtu.be/AeMpwOn516s The battery capacity remaining script was taken by a user, improved, and sent back to me to share with the community. This is what open source is all about...