250

  1. Michael9865

    Eaglet 250 From Willy Nillies Tail Dragger Configuration

    This will be my build log as I construct a tail dragger version of the Willy Nillies Eaglet 250. It has been a while since I built a balsa airplane. My hope is to use the thread by @speedbirdted, https://forum.flitetest.com/index.php?threads/willy-nillies-eaglet-250-build.62260/, as a guide. His...
  2. M

    Best flight controller for 250 quad w/ alt hold???

    Hey everyone! Need some advice on the best fc to use for my 250 quadcopter. I'm using a turnigy 9x with frsky xjt only, no other mods, stock firmware. I've been wanting to move away from the SPRacing f3 boards for some reason, I've broken 3 of them and have tried the acro, then deluxe, then...
  3. D

    Newbie Needing Some Serious Help - MOTORS WON'T SYNC

    :applause:Hey All, So i'm a complete newbie to this site and the whole quadcopter hobby, it's been quite the experience so far!!. After tons of research and Youtube Videos I thought I could build my very first FPV250 quadcopter without any hassles - but of course nothing goes smoothly ;). After...
  4. A

    check my new video and please subscribe

    video link https://www.youtube.com/watch?v=QryRlkw5zmo :cool: Please like and subscribe, and share this video and go check out bolt rc link http://boltrc.com/ Quad Gear NEW go-pro hero 4 session 2206-2350kv pilot alex genovese jr supplier bolt rc http://boltrc.com/ quad bolt 250 esc-little...
  5. A

    Hey Guys Check Out My New Sunset Video

    video https://www.youtube.com/watch?v=ESPVyWcy_Nc&feature=youtu.be Please like and subscribe, and share this video and go check out bolt rc link http://boltrc.com/ Quad Gear NEW go-pro hero 4 session 2206-2350kv pilot alex genovese jr supplier bolt rc http://boltrc.com/ quad bolt 250...
  6. Zoszko

    CC3D - 250 Drifts away

    Hello everyone! I have just built my 250 FPV today, it was quite easy and straigth forward. It came with a CC3D, I have followed the wizzard and configured it. It does fly but I am having problems with it staying in place. Once I give it enough throttle to lift off it will start moving to the...
  7. A

    pls have a look at my new video of me flying insane los quad 3d

    pls have a look at my new video of me flying insane los quad 3d please like and subscribe and share this video video ulr https://www.youtube.com/watch?v=TCb3n5D8dIE pls whatch in hd Quad Gear Still trying out the new blackout motors from bolltrc 2206-2350kv pilot alex genovese jr supplier...
  8. A

    pls check out my new video with my bolt 250

    pls like and sub video https://www.youtube.com/watch?v=IzUsfs1EbZM quad specs trying out the new blackout motors from bolltrc 2206-2350kv pilot alex genovese jr cam man Zarak Khan supplier bolt rc http://boltrc.com/ quad bolt 250 esc-little bee 20amp motors-blackout fc-naze32 props-hq5x4.5...
  9. L

    Flysky fs-t6 Pairing question

    Hi! I've got a problem pairing my flysky fs-t6 radio with my new orange r615 receiver. It's a 2.4ghz tx and rx. I've used the receiver that came with my radio, the flysky fs-r6b, on mu quad, but want to switch to cppm to allow for gps and a more tidier frame. I'm compleatley new at this, so any...
  10. D

    drone racing, verry fast backyard practice!

    hello, i just wanted to share my video. its a video shot with a 250 size FPV quadcopter, i hope you guys like it. if you like the video please subscribe to my channel for more fpv racing action
  11. T

    Troubles with 250 quad take off

    Hi Crew. I'm new to this game so take it easy. I have built, and rebuilt, flashed and reflashed, Quadtriple Checked my Motor/Prop directions, Calibrated, binded and everything that i can think of but: I can't get this quad to take off! Everything spins the right way and makes a great noise but...
  12. D

    broken feathering shaft HK 250 GT. Is it common?

    Hello fellow hobby enthusiasts: This is my first post so constructive criticism will be more than welcomed. With that out of the way a bit of backstory. I've recently got into RC helis and thought that a 250 class would be a good place to start. This is because I live in a super crowded city...
  13. P

    Naze (cleanflight 1.9) starts complaining about battery voltage too soon.

    I'll start getting (what I assume are) voltage warnings after only about 3 minutes of flight. When I set it down, my voltage is at 11.5, which is 3.8V per cell! I have the warning set to 3.5, and by the time I set it down, it's gotten to be a pretty insistent warning. Looking at my settings, I...
  14. mavrik12

    5.8 fpv system not working right

    So I have a 5.8GHz sky zone plug and play + quantum fpv goggles. I did have it working at first but I only got about 100ft to 150 ft of rang from it. From what I can tell that is really small. Now I cant get more than 50ft away and my signal keep cutting out randomly even if I'm not moving or...
  15. P

    How can I adjust my throttle so that my quadcopter needs less stick to stay up

    I have this (admittedly fragile but) nicely flying 230 quadcopter. I'm using the KK flight controller. I can do nice banked turns and stuff, but I need to keep the throttle at 60-70%, rather than the 50% I would expect. I also have to "emergency compensate" with the throttle more than on my 450...
  16. E

    HELP - 250 SIZE QUAD

    Hey guys i am wondering what your PI settings are for your racing quadcopters PLEASE RESPOND thanks :)
  17. T

    Banggood 250 racer

    Hey guys! This will be a thread dedicated to my first FPV 250 quad build. Flight test is awsome, and i am looking forward to going through this process with you guys. Excluding an old Syma X1 toy that I totaled a few weeks ago, this will be my first quadcopter, so wish me luck. I have ordered...
  18. Snarls

    Snarls 250 Summer Quad - Performance ZMR Build

    Hi everyone, for this summer I am planning to add a mini quad to my small arsenal of RC gear. I am hoping to get pretty serious with this new quad as well as with my 550mm spider quad with gimbal. Due to it currently being my first year in college I have only been able to log a handful of flight...
  19. C

    Tunrigy Airsoft lipos for 250 racer?

    Hi all, I'm new to quads and also the forum so firstly I'd like to say hello (Hello) :) Now that's over with time for the noob questions that will do doubt come from me in there hundreds! I've already order all the parts for my build which i shall list now so you guys have some idea what I'm...
  20. S

    DIY Tarot 250 FPV Build - Suggestions?

    Any input is appreciated :D. I already have a DX6i so went with the LemonRX but might switch to OrangeRX depending on performance. Got 5030 props to start and 6030 to advance and will get HQ 6030's or HQ 6045's when I get real serious. Also looking for input on what OSD to get. Let me know if I...