emax

  1. NoobFlyer

    Noob needing ESC/ Motor help

    I’m a newbie to RC Aircraft but am meticulous when it comes to following the right order and getting the details right, especially on something like this. I’ve connected my motor, ESC, Receiver, and Aileron servos in order to setup and calibrate my ESC. I got a successful bind from my receiver...
  2. K

    Help! TinyHawk Freestyle II FRSky to DSMX?

    I'm interested in getting a mini quad to learn how to fly FPV, but I want to skip the tiny whoop step and get into flying freestyle. The Emax TinyHawk Freestyle sounds like a great platform, and is very cost effective. However, it runs on a FRSky receiver integrated into the FC/PDB and I have a...
  3. B

    Dead voltage reg on Magnum FC

    I have an emax hawk 5 (Magnum stack) and after it fell out of the sky today I realised the Board wasn’t booting up. The ESC was outputting Vbatt but a multimeter on the 5v outputs on the FC showed only 1.5v. When plugging in the USB, everything booted normally. I’m guessing I have a dead voltage...
  4. D

    Frsky or Spektrum?

    Hey guys and girls! Ive been looking to buy a new drone and im thinking of buying a. Emax Babyhawk R or the orginal. I know that it comes standard with a frsky receiver. my question is should I buy spektrum receiver and get a spektrum transmitter or should i got with frsky? what are the...
  5. S

    Offer For Sale - Used power Pack A motors/escs 6 sets.

    These are used, tested, sets of Power pack A motor/esc. what you see is what will be included. I have 6 sets available. Each set will include 1 motor (MT1806), 1 esc (12a), and 4 props that coordinate with the direction of the motor. Addl props sets (2cw,2ccw) available as well. Please...
  6. Snarls

    Armattan Rooster 6" Build Log

    I don't know about you guys, but when you are in a multirotor club there are some components that just become ubiquitous. For instance, within the past couple months four of our club members, including me, have upgraded to Emax litespec motors. When it comes to frames, the popular choice has...
  7. C

    Bushwacker Build Questions

    I am building the FT Bushwacker as my first plane. I noticed that power packs C and B were gone from the store (not just out of stock, they aren't there anymore) and I am looking to round up the parts from other websites and possibly save some money, but still get roughly the equivalent to the...
  8. C

    Counterfeit EMax motor?

    Hello, I have bought four EMax motors in the past - all had soldered bullet connectors, and came with a wrench that fit the screws that they came with. I just received an EMax RS2306-2750KV motor from a reputable dealer, and several things have me concerned that what I have received a...
  9. M

    Underpowered Gremlin?

    Hey again guys, more Gremlin problems here. So I just watched the newest FT video, and noticed how much punch the gremlins they were using to race had. Now, mine has no where near that much power. I can hardly get enough altitude to quickly do a flip. Does anyone know why this might be? My...
  10. B

    Emax Femto F3.. I Fried It

    Looking for a bit of help locating the regulator it still all powers up via the usb and works fine in betaflight, Just looking for some help locating the regulator i have attached a link to pictures but they have come out terrible quality. any help is appreciated. I have come to this forum as i...
  11. Vampircorn

    Motor Stutter

    I'm running an emax rs2205 2600kv motor with a 40a ESC on a 3S lipo and 5x4 props, and I'm getting issues with the motor stuttering on low throttle. I tried a 12a and an 18a ESC and had the same issue. Is my battery too low voltage or is my ESC too low amperage for the rs2205?
  12. M

    Newbie question...

    I am trying to build my first FT210 and I saw that in the FliteTest store they are selling a power pack (https://store.flitetest.com/e-pack-2205-2300kv-better/). In the details i see the description of the motors says: (4) Motors - 2205 2300 Emax (CW Threaded) My question is... do the pack...
  13. A

    250 Class Quadcopter Problems

    Hey there, I have been building a 250 class quadcopter since the last 2 weeks. I'm using the following components: 1. ZMR 250 C.F frame(Chinese clone) 2. Naze32 10 DOF Rev6 3. Marspower MX1806-2280kv motors 4. Emax Blheli (yinyanmodel.com) 12a esc's from...
  14. E

    Emax 2213-935kv Nuts replacement

    I bought a tough tilt tricopter with a power pack D. I once didn't screw on the nuts of my Emax 2213-935kv motor tight enough and i lost one. I have been searching for a replacement but I can't find any. The one I lost was black and screws on counter clockwise. It would be really nice if anybody...
  15. D

    Turnigy 9xr Pro Newbie question!

    Good Afternoon all! This will be my first time posting on the forums! (I have been following FT since 2013) I come to everyone today with a predicament while assembling my SuperBee electronics. My setup is as follows, Turnigy 9xr pro with FR Sky DJT RF Module and V8FR-2 HV receiver. The ESC's...
  16. A

    Emax RS2205 motor issues

    Please watch my video and help me. Thank you in advance.
  17. landedit

    So I want to make a fast plane...

    I need someone to explain KV to me. Keep it simple. Ive read the technical definition and understood very little. Act as if Im five :P Also, Id like to keep it in the traditional electric motors. No etf rocket jet type motors :)
  18. R

    My emax skyline 32 doesnt seem to default to acro mode when none other is selected

    I've been flying a quad for about 6 months on and off, down the park on a free afternoon, I started in horizon mode line of sight till i could do some simple moving and had the feel for my quad. i then changed to what i thought was acro mode. and started getting the hang of that, line of sight...
  19. R

    FT Bushwhacker electronics setup help

    Hey gals and guys! I am trying to get the gear together to build a Bushwhacker (God I love that plane). However, being in the UK I'm going to have to source the electronics individually and, at times, approximate to the closest equivalent available. Since I'm not exactly experienced with...
  20. Snarls

    Going Full Kiss - Martian 220mm Build Log

    It's finally time...time to go full KISS. Considering I have not used anything KISS before this should be interesting. This is a 4s performance build with a Martian II 220mm frame, EMAX red bottoms, KISS 24a ESCs, and the KISS FC. Full Parts List: Frame: Martian II 220mm Motors: EMAX RS2205...