transmitter

I first bought a DXS transmitter + Receiver (AR410) combo when I got started with this hobby. I only recently learned that the DXS transmitter is not programmable, so I am looking to upgrade my transmitter. Since I already have a Spektrum receiver, I would like to stay with the Spektrum brand. A...

FPV Head-tracker setup is similar for all brands of air transmitters using trainer mode. It’s convenient to look at videos instead of digging out the info on transmitter users manual. So I made a couple to help beginners out. There are plenty of videos for FrSky and Open TX based radios. So...

I made an open-source, Arduino-based handheld transmitter. This handheld transmitter can be used in any robotics application that requires user input, but I'll mainly be using it for future custom RC planes. You can find all the files/documentation/software on GitHub. The transmitter includes...

So I've been flying for about 2 years now using my Spektrum DXS but as my fleet grows I'm finding it to be somewhat limited. It sucks to retrim every time I switch plane and AFAIK it has no advanced features like expo. All of the Spektrum stuff seems really expensive compared to other brands, so...

Hello everyone, Apologies for the following newb questions. Not-so tech savy regional airline pilot here just trying to get into the hobby. Just re-discovered all things FliteTest and I feel an addiction kicking in. Long story short I have a little prior experience with random ready to fly...

I really have too many ideas running around my head... oh well. I’m planning on building a removable camera pod to be placed on the bottom of an airplane, with pan and tilt. I’m considering using a low-light/IR camera, so an IR illuminator may be included. Regardless, the design will probably be...

This is my first time performing Hydrodipping on my Flysky FS-I6, which explains the poor transfer on the back of the TX. Nonetheless, this weekend project was inspired and motivated by Fuzzy Whumpkin from this thread:https://forum.flitetest.com/index.php?threads/flysky-fs-i6-custom-paint.32241/...

I just released a new "Edgy" Sound Pack for Open TX transmitters. ❤️️ Some neat things about my Sound Pack: ❤️️ --Drop in replacement for other English Sound Packs --750 new audio files, more than any other sound pack --Unlike other Sound Packs, you can browse in Windows Explorer and see the...

I have a futaba T7C transmitter in metal transport case with other bits I don’t know what they are as I’m selling for a friend. Open to offers as I’m not sure what it’s worth. PayPal or bank transfer. Postage available if paid for. Looking for around 90-100 pound or equivalent will add...

Hi Guys, I am new to this hobby. Just got my first plane which is a Horizon Hobby Aeroscout Mini. It comes with a 2.4 Ghz 4 CH ,MLP4 transmitter. It has a rudder and elevator control. I was wondering if I could use the same transmitter with any other receiver which would allow me to add the...

Hi there! I recently decided to give trying a fly due to the quarantine and purchased the Horizon Sport Cub S 2. I’ve been having a blast flying it so decided to try scratch building an FT P40. The Sport Cub came with a Spectrum MLP6DSM transmitter and I purchased a Spektrum AR637T receiver...

hi i got an old futaba transmitter with a Ni-Mh battery and it is on 8,4 volts. but when i plug it in to the transmitter it only works for a second and then it turns off. i have tried charging it with 200 Ma, 3 volts for a hour but its still the same. Any idea why, and what can i do.

Hi, I have a TGY i4x (can be found here) and I would like to add a couple of switches to it so that I can drop bombs from my plane. I'm fairly new to RC aircraft and stuff but I was wondering if its possible to add a 2 position switch that takes a servo from its neutral position to fully rotated...

so, I decided to go with a P-51 as my second plane (I think starting with a umx radian prompted the urge for overkill). I know it’s likely I’ll destroy it, so I went on banggood and got a cheap RTF Volantex make. Now that i’ve unboxed, I see it even comes with a toy-looking transmitter (pics of...

Hi, I am currently building a drone with Arduino. I bought the FS-T6 as transmitter it come with a FS-R6B receiver. I am having trouble getting the endpoint to between 1000 and 2000. No matter how I adjust the endpoints, they still stayed around 700 - 1000. Is there a solution for this? Thanks...

We're excited to be carrying the Turnigy 5 X Mini Transmitter& Receiver! The mini Turnigy 5X is a full range, entry level 2.4GHz transmitter that includes switchable mode functions between mode-1 and mode-2*, fixed wing and delta mix function, servo reverse, dual rates and adjustable stick...

Turnigy TGY-i6s (clone of Flysky FS-i6s), plus the following 3 receivers: TGY-iA6B (v2), 6 channel 2.4G AFHDS w/ SBUS TGY-iA6, 6 channel 2.4G AFHDS TGY-iA6C, 8 channel AFHDS PPM/SBUS (for multicopter) Also including a Flysky FS-CVT01 voltage sensor module Updated with one of the most recent...

Our servo line just keeps growing and growing and growing with excellent performers! Introducing four new 25 tooth servos from Hitec! HS-318 HSR-2648CR HS-488 HS-788

Hi all, I want to get into rc and obviously need a Transmitter. Ive asked around and the answer I usually got was: 6 channel is what You want, if I were u id take Spektrum. But nobody could Tell me which of the tenthousand Spektrum 6 channel to take. Anybody have Tips I dont need the newest g3...

the turnigy 9x could only communicate with the reciever within 10 feet only. What could actually be the cause? Pls help