I've got 3 Master Series SBKs and at least 5 more scratch builds cut in the build line up that I am not going to build anytime soon. If I build them, I will fly them. If I fly them, at my current skill level, I will crash them. Spectacularly!
Introducing the 50mm EDF F-22! This is a single engine, easy to build, fun to fly EDF jet. It's not the biggest or fastest F-22 out there, but it certainly is fun!! It runs on a single EDF to simplify things and only uses two 9g servos for bank and yank control. It has a wide flight envelope ranging from low and slow to high speed craziness!
some how every time I have an idea for a design someone on the forum does it the next day uhhhhhhhhhhhhhhhhhhhhhhhh I wanna cry like the f-22 is my favorite plane this looks so sweet and good
Introducing the 50mm EDF F-22! This is a single engine, easy to build, fun to fly EDF jet. It's not the biggest or fastest F-22 out there, but it certainly is fun!! It runs on a single EDF to simplify things and only uses two 9g servos for bank and yank control. It has a wide flight envelope ranging from low and slow to high speed craziness!
I'm not the designer, but the answer is "no". You'll have to surf through this thread and look at the pictures to figure it out. It's a bit complicated, but doable with the photos here.
I'm not the designer, but the answer is "no". You'll have to surf through this thread and look at the pictures to figure it out. It's a bit complicated, but doable with the photos here.
This is how I built mine. cut the pieces out, get all the folds in place, check and double check the photo's of other builder in this post, and test fit the pieces with the formers. Fortunatly stuff pretty much only makes sense one way. but once you DO get it sorted out make sure to mark it right away before you start to glue it up!
Introducing the 50mm EDF F-22! This is a single engine, easy to build, fun to fly EDF jet. It's not the biggest or fastest F-22 out there, but it certainly is fun!! It runs on a single EDF to simplify things and only uses two 9g servos for bank and yank control. It has a wide flight envelope ranging from low and slow to high speed craziness!
When you go to print the file, and set to print it as a "poster". it will automatically split the plans up to fit on as many sheets as necessary. You'll need to manually trim and fit them together from there.
Thanks for making these available. I'm late to the game on this one, but winter's coming and this looks like a great way to get ready for spring. Just printing the stl files. Rest will have to be old school as I don't yet have a laser cutter.