quad

I pre-ordered the DJI Mavic Pro towards the end of October. Unfortunately DJI has had massive shipping delays due to the unforeseen overwhelming demand for the Mavic Pro. Needless to say, I've yet to receive mine. Has anyone received their's yet? If so, about when did you order it? (I've been...

Hey, I came across FT a few weeks ago and have been interested every since. I've had quite a few small drones, rc planes and just pre-ordered a mavic pro. I am now interested in purchasing a racing drone. I was curious if someone had any advice? I've been looking at builds of the 210 and the R5X...

So I know how to fly a quad. I fly several small little indoor/backyard ones. So I now the basics. But soon I want to get a legit fpv racing drone. Here is one that is just barely in my price range that comes with everything...

MultiRC sent me a 150mm Shenanigans quad frame to review. (Rest of the kit I purchased) This is a new direction for me. Tiny and I have to say I do like the use of the TPU. Flexible 3D printed parts are very neat. Not only do they absorb vibrations on the arms but they also help with impact...

Hi I have seen somewhere that you can program your quad to have about 10% throttle at the low stick position so that you can still have control. I have looked everywhere I could think of and cant find anything on this. Is there anyone that know how to do this or where I might be able to find...

Hi everyone, I haven't posted before but have been checking in for a few months now. My son and I first discovered Flitetest on YouTube. I remember the first ever video we watched, it was this the DIY Foam Board Water Plane (The FT Sea Duck). My son, who is 4, wanted one immediately, and still...

I have always been fascinated Hayao Miyazaki, whose love and fascination with flight and flying show through in his many inspiring works. I've been interested in building a flying platform similar to dragonfly or this Dragonfly-winged chariot-style craft. With research it seem possible. Someone...

I had a weird idea of attaching a helium balloon to a quad to keep it in the air for a super long time. Anyone else thought of this too? Seems do-able. A helium balloon with just enough gas in it to help your quad, or plane I suppose, stay in the air for much longer than by just from battery...

Hello Flite Test, and Hello fellow prop heads! What I want to do is make a Quad layout of 4 motors, around 250mm to 300mm apart from each other (X configuration). Each motor will be mounted on/tilted by a servo, and they will move by the following rules: Plane mode: Front motors pull the rear...

https://www.youtube.com/channel/UC-S-RLq0LXCH_TK-3rjOK-Qhttps://www.youtube.com/channel/UC-S-RLq0LXCH_TK-3rjOK-Q

So I managed to build my own racing quad, and everything works but the FPV. I had it working for a few days, then I broke my Transmitter. I ordered another transmitter, and it worked for about 3 seconds, then all I got was 'no signal' So i tried a new camera, and still nothing. I tried a third...

My wife and I are going on vacation next week to a quiet little beach in North Carolina. I'm planning on taking my mini quad and doing some flying around the beach where there aren't a lot of people. What should I do to the quad or take with me to keep from ruining it while on vacation? I got...

Hey everyone! I am finally registered to the forums! I have been watching FT for about a year and recently went to my first FliteFest with my wife and two year old son. He absolutely loved it! (so did my wife and I!) I have been interested in RC for a long time but I just never had the room...

This is my first quadcopter with anything other than a kk2 flight controller andi finally found a download for openpilot because thats what is etched on the bottom of the flight controller. then after a while i got the flight controller to be recognized by openpilot. the only problem is that...

Please like my page and share the video and watch it in HD to get the full experience https://www.facebook.com/jrfpv/videos/268927606808724/

First off, hello, it's nice to meet you all. I'm new to the forum. I recently took the plunge into fpv quads after buying a pair of fat sharks, a dx6i, and an inductrix 200fpv. Either I'm really bad at this, I haven't set it up right, or the inductrix 200fpv is not a quad for beginners...

Recently I got my hands on a FliteTest VersaCopter V2. Specs: Flite Test VersaCopter V2.0 Power Pack E (Racing Mini QuadCopter) Naze 32 Flight Controller Rev 5 FrSky XSR 2.4 Ghz ACCST Receiver The build which I will detail below was pretty straight foward and if you listen to the podcast...

Hey guys please come check out my fpv and acro/los channel on multirotor so and other rc stuff. https://youtu.be/rwyGzMZMZeY

Hello Flite Test forum.

I have an fpv setup for my 250 quad. For some reason I can not get an image to display on the receiving end. Here is a parts list for the setup: Receiving End Turnigy Nanotech 3s 1300 mah LiPo Quanum V2 LCD screen RC832 5.8 AV Receiver Circular Polarized 5.8 antennae Transmitting End...