quad

Hello Flite Test Forum! And mods. Really sorry if this is the wrong spot! Looked like the best area in my opinion. Um, I'm new here so first off hello! My name is Trevor and I've been binge watching FliteTest videos for a few weeks now since I found the channel. I've always been a fan of...

Hi! I've got a problem pairing my flysky fs-t6 radio with my new orange r615 receiver. It's a 2.4ghz tx and rx. I've used the receiver that came with my radio, the flysky fs-r6b, on mu quad, but want to switch to cppm to allow for gps and a more tidier frame. I'm compleatley new at this, so any...

I have a Website to announce we specialise in the Blackout Frames we have the whole range. We also have a great range of props to sell cheap. We are the new kids on the block and we welcome you to come and see our quad and hexcopter hobbyshop with everything from frames to rapstrap. I am...

I have a diatone 250 ghost frame which is an X style quad with hobbywing ESCs, a KK mini with stock firmware, and DYS 2300 kv motors. When i first got the quad it was LOS since i hadn't yet got the money for FPV and i did the settings to the best of my ability but it just doesn't feel locked in...

Hey guys, first time here :D I've built a quad. obviously. I cant seem to get it stable.... I've calibrated everything as per instructions found here on the flite test site. Both the kk board and the qbrain quad esc work great in calibration mode but when i power up things go... hinky. I'm...

Hi Guys! Keeping the upcoming bad weather in mind, when you can't fly your quads, I've been working on a programming project for a while, where I write a multi-rotor simulator game. My goal is to achieve the maximum realism, and this includes physics simulation, fully customizable aricrafts with...

Hi guys, So I have been flying my Nighthawk Pro 280 (ARF) pretty hard recently and I had a crashed which has wiped out my motor which I had ordered and now arrived. My only question is what is the connection for connecting my motor to the ESC/PDB? It looks like a plug with three pins and where...

Earlier today i was flying my 250 quad and "landed it" into the only piece of concrete around.. ugh. Now when i power up the back left motor does power up but only gives about half the power of the others and makes this odd odor that smells a little bit like new plastic. :confused: I have...

Hi Flitetest Crew, I am new to this mini quad stuff and have just brought a nighthawk pro 280 ARF but I am a little bit confused with which props to use. I brought some DAL 5045 Bullnose props with it. Can I use this will my 3S batteries or not? Any help would be great Thanks!!! NuminousFPV

Unfortunately I have to get out of RC. Letting entire lot go...Local pickup Near Tampa/New Port Richey, Florida Craigslist ad for Pictures http://tampa.craigslist.org/psc/tag/5232166157.html Selling ENTIRE RC Lot. TONS of stuff for the Beginner all the way to Advanced. Pictures show everything...

The HMB-235 before all the fun started :) Mark from http://www.multirc.com/ asked me to take a crack at their HMB-235 frame. He sent along a frame and some DAL BullNose 5x4.5 props. The rest of the gear I simply transferred from my 250 frame. HMB-235 packaged DAL BN Props My trusty 250...

I'm looking to build a quad using the ElectroHub kit. I was wondering if anyone can help me understand the simple disk motor mount. How does the motor get attached to the motor mount? I see that each disk has 4 holes and the photo shows 2 of these used to secure the disks to the boom. Do I...

Hey there, I just wanted to share my build instructions / build blog I did about putting together my first ZMR250 budget FPV mini quad. It's completely in German, so this should be interesting to all the German Flite Test forum users. have fun...

For my second quad, what will be cheaper? To buy ready to fly quads or to build one. I've never build one before. Also links to specific quads would be great. I would really like to to be able to hold a camera to take pictures and video. Thanks

I have made a quite a few flying machines over the past 3 years but this one is the most custom yet as I have taken apart my 680 sized hex and am converting it into Quad or if needed a co-axial octa. This is going to be used to lift a GHT 3 axis gimbal and a NEX size camera (specifically an...

So there I was in the not-so-local hobby shop on the way back from dropping my wife off at the airport (surefire formula for an RC purchase:cool:) and there on the counter were stacks of these little guys just received a few days ago. Having purchased a couple of Pico QX's for my son and my...

Building my first Charging station! i only have a handful of Lipo batteries. But i wanted a metal box that i could run cable in and had a lip i could open and close easily! This is what i was thinking! http://www.amazon.com/gp/product/B005UPA10Y?redirect=true&ref_=s9_simh_co_p328_d0_i2 I will...

I've been traveling through my country, trying to get awesome shots from landscapes. With it being a tropical country and all, I am bound to get some rain. At first, I thought it would not be a big deal, because I could wait it out or just fly if it was only mist. But yesterday I almost lost my...

Hi, I am building a Tarot Iron Man 650 quad for AP. Im using 740 KV motors with 30A ESC's. I was wondering about power distribution, would it be ok to solder the wires together or would that cause heating issues? I was looking at some of hobby kings power boards, but iv heard they get very...

Hi Im new in the hobby of flying rc's and Im really interested in building my first quad now my concerns are... Which remote can I buy for a quad? I saw a Turnigy 9X can that be programed for a quad? Which flight controller would I need for that remote? How do I program any remote to fly a...