receiver

Heya FT Forum - I'm selling a Graupner MZ-12 radio and 2 GR-16L receivers out of the Boston metro area - http://www.ebay.com/itm/Graupner-MZ-12-and-2-GR-16L-Bundle-Excellent-Condition-w-Original-Packaging/282622129202 Let me know if you're interested.

I am just getting into a hobby. Could anyone suggest what kind of Transmitter and Receiver is the best for a beginner?

I ordered this vtx for a racing drone I am trying to build but i forgot to buy a receiver. I looked around my shop and I found this one but i'm not sure if they would be compatible. If they aren't compatible do you guys know any cheap ones that would be compatible? thanks. the vtx...

I am making a twin motor micro triplane with micro quad motors and 6 amp escs. I want to use a bec but the escs I have don't have the red wire required. I still need to keep things light so how should I power the receiver?

Deluxe F3 Flight Controller With Built-In OSD Turnigy TGY-IA6B V2 Receiver 6CH 2.4G AFHDS 2A Telemetry Receiver W/SBUS I got this from a friend for free because he didn't use them and this is my first build and I was wondering if anyone knew a video or could make one showing me how to get osd...

Deluxe F3 Flight Controller With Built-In OSD Turnigy TGY-IA6B V2 Receiver 6CH 2.4G AFHDS 2A Telemetry Receiver W/SBUS I got this from a friend for free because he didn't use them and this is my first build and I was wondering if anyone knew a video or could make one showing me how to get osd...

Hello fellow hobbyists, this may sound stupid but I am new to the whole diy multirotor thing and I was wondering if the fr sky d4r-II is compatible with Flysky FS - i6S 2.4G 6CH OSD Transmitter, I know the transmitter isn't great but I got it off a friend for free so I'm not complaining. I also...

I have an Eachine Falcon 250 Pro with a naze32 and eachine ia6. I also got a qx70 and bound to it with my eachine i6, not realizing i needed a new profile for each model. Instead I made a new model and bound my ia6 to it after realizing that. The ia6 operates exactly the way it should, and it...

I cannot get my receiver to power on or to bind to my transmitter. I have a quadcopter in which everything else is working perfectly, but I cannot get my the receiver/transmitter to work. The transmitter itself is working fine. All ideas are welcome.

Hello all. I have been looking all over flite test.com and YouTube to find out how am I supposed to connect two servos to one aileron input on my 6 channel spectrum receiver. Do I need to buy yet another Y harness for these? Or am I supposed to use another input and configure it in the mix of...

Hello guys looking for some help here. I was able to pick up an Eachine Falcon 210, and a FlySky th9x. Unfortunately I have been unable to get it air born yet or at least control it in the air. I can`t figure out how to set it up in librepilot and if whether or not I need a new receiver or...

Suitable universal receiver(s) for RTF transmitter? Are there any that work? I have read that Turnigy and FlySky Rxs may work. Not sure. Would soldering my own be a possibility? Rx in question is a cheapo 8ch receiver from LX/SkyFlight. This is what I am trying to find/build.

Hi, I just received my new FS-IA6 Reciever. The instructions were in mandarin so I tossed them - any way because I could not read as well as my eastern siblings I could not know the wiring diagram ( long story short I put - on + and vice versa.) *poof* the terminals were not happy about it -...

LX/Sky Flight receiver compatibility This is my current Tx/Rx system. http://www.bananahobby.com/sky-flight-hobby-8-channel-2-4ghz-radio-system-set-w-thrust-vectoring-transmitter-receiver.html Any other receivers on the market that are compatible with this model? Wanted to save myself some...

Hi! I'm new to the hobby and on a university team to build an aircraft. I'm looking at radio systems and really like the DX6e transmitter for my needs. For a receiver, I want a customizable fail-safe so that I can specify the rudder, aileron, and elevator positions if radio signal is lost...

I am a teacher at a junior high and high school in rural Oregon (Oakridge Junior Senior High School) and have recently started 2 Robotics classes last year. My student base is considered very high poverty and I wanted to start a program for my students that they would never get the opportunity...

Hey all! Transmitter: DX6e Receiver: Spektrum AR610 6CH sport receiver Dsmx flightchip: Naze 32 ESC: Arris 20A, 2-4s LiPo PROBLEM: The controls do not show on clean flight. (No Stick movement) The controls do not work when I am connected to cleanflight and when I am disconnected. Cannot set...

Dear All, after a few years of a break I'm restarting the hobby, because my 5-year-old son wants to learn to fly a plane. We will be building a Tiny Trainer and an Old Fogey so we need to buy a transmitter or two. I have some old BNF "toys" (Vapor and Blade 120SR) that I would like to control...

I'm just starting the hobby, though I've been looking over the fence at it for years. Today I ordered the 3-pack starter planes to train on, and the Bloody Baron. And for electronics, I bought the "B Series" power kit. I was watching Josh B. explain hooking up electronics. He started with...

Can somebody help me, I'm considering the FT guinea pig but I don't know how many channels it needs. I only have a DX6i but I'm worried it won't be enough.