quadcopter

I am building a 450mm quad with a + layout. This quad will be used for acro and FPV as I have smaller quads but would like something bigger to spot in the sky flying LOS. Im using a NAZE32 with spectrum reciever. As Im using this quad for acro It is very light and the frame is carbon fiber. I...

I have now had a DJI Phantom 3 Standard for 2 months and although I'm no expert with it I have been loving it! This is a video I made out of the video I have gathered over the last 2 months, hope you enjoy. There are links to the full videos for some of the clips I used in this video in the...

I crashed my QAVX (clone) the other day and a one of original wire that came with the evolution receiver broke so i thought that i should upgrade the all the wires that were soldered on the evolution receiver. After i got done resolding all the wire and i put my quad back together the remote...

WARNING- !I am a NOOB! I have made a Quadcopter using DJI F450 Frame. I have 4 1000kv chinese Motors and 4 Chinese ESCs connected to a NAZE32 rev6a 10dof. Firstly all ESC got calibrated properly but after some time 1 of the ESC got dis-calibrated (Throttle starts late). Now this ESC does not...

Hey guys, Just wanted to say thanks for such a great resource. I've been into quads for a couple of years...started out with the toy ones (Syma X1 and Hubsan X4). Got pretty comfortable flying those and decided last year to build my first quad. After collecting parts for awhile, I finally...

Just finished building my second ever quad today. went out for a test flight and i am having problems with lots of bounce back on pitch, roll, and yaw axis how do i fix this? Its really hard to control and feels sloppy when its doing this. My quad parts - EMAX 2205 2300KV - 20A little bee...

Hi guys & girls, I have recently built my first quad(250mm)- zmr250, naze32, 2280kv motors & emax blheli escs. I'm currently using Orange 1000mah 30c-3s batteries with Imax B3 compact Lipo Balance...

Just thought Id share this video of some mini quad and dji phantom 3 standard flying that we made whilst it was too windy for any plane flying or at least it was too windy for me to fly a plane in! Hope you enjoy it! my mini quad setup can be found in the video description on YouTube.

So, I have been flying rc for around 2 1/2 years now and I 3 planes (fourth is in construction) and I was watching Flite Test and MR. Steele. And I was immediately intrigued. My question was on banggood.com there is the Eachine Wizard 220 arf that I found via YouTube and it said 48CH, this...

So, I flew(and crashed) my quad and now one of my rotors won't spin, is anything stuck there???? Help please, video here: https://youtu.be/R6cnqCfynEM

This is my first foray into quadcopter and I need help.... like the title says,I need some help setting up my 260 quad(https://hobbyking.com/en_us/kingkong-260-p-p-black-red.html) I am using librepilot and am now stuck at the transmitter setup wizard, whenever I try to setup the yaw, librepilot...

Hey there, I have been building a 250 class quadcopter since the last 2 weeks. I'm using the following components: 1. ZMR 250 C.F frame(Chinese clone) 2. Naze32 10 DOF Rev6 3. Marspower MX1806-2280kv motors 4. Emax Blheli (yinyanmodel.com) 12a esc's from...

Hello, I'm fairly new to quadcopter flying, I've had a few toy grade quadcopters, but nothing hobby grade. Is there a way to change the xhover r5x between self level, horizon, and acro modes, so I can slowly progress as I learn? How would I go about doing this if it is possible? Also, what mode...

I have been thinking about buying the Rise Vusion 250 quadcopter as my first FPV quadcopter. Do any of you have any other suggestions for a quadcopter around that level? Thanks in advance.

Alright it's time for another build! This time we're going even smaller; to the micro scale. Winter is approaching and that means short days, cold temperatures, and snow. To keep myself occupied I've decided to finally get something I can fly indoors. The Tiny Whoop and Nano QX are popular...

Hello All, I am new to the hobby, and looking for a good place to start. I played around with nitros powered rc cars in the past and that was a blast, stopped because there wasnt much more that interested me, after watching a bunch of youtube videos and seeing where all this has gone, I have a...

The beginner series was a great resource for me when I started in the hobby a few months ago. The series primarily/only discusses fixed wing aircraft. As many are starting the hobby with multirotors, I think it would be great to update the series to help beginners, such as myself, feel more...

hi there i am not new to quadcopters but new to building one i would like to make one it is going to be 650x650mm and about 100mm high and will be carrying about 4-5kg and was wondering what motors and props to use and what gimble would people recomend for a dslr camera and what are peoples...

Hello Guys; I was just searching for an Headlight for my bike and saw this Quadrocopter; http://www.lightinthebox.com/de/eachine-racer-250-fpv-drohne-in-5-8-g-sender-osd-mit-7-zoll-monitor-32ch-hd-kamera-arf-gebaut_p4778429.html?category_id=50090&prm=1.2.1.2 I do actually drive with RC cars...