spektrum

I have a versacopter with an orange receiver and a KK2.1.5 board with the remote programmer and it will not arm. ESCs are calibrated, it is bound, it lights up, does its beeps, but when on my DX6e I put the sticks on down and right to arm, it will not arm. PS. all trims are centered + good...

i have the Spektrum DX6e controller with a Spektrum Quad Race serial receiver and the controller is binded to the receiver (because the orange light is solid), however the receiver will not relay information to the flight controller which is a naze32 im not sure if they are compatible and i'm...

I'm just starting the hobby, though I've been looking over the fence at it for years. Today I ordered the 3-pack starter planes to train on, and the Bloody Baron. And for electronics, I bought the "B Series" power kit. I was watching Josh B. explain hooking up electronics. He started with...

So I am completely new to the Scratch built rc line, and decided (even though multiple people have warned me not to), to start with the PUN JET! Yes yes it is not a good starter plane, but I wanted to start with it. I got through building it just fine until I tried connecting it to my spektrum...

Hi, I have a Spektrum Dx4e and the bind key/button is broken...I was wondering if there is any way to bind with out using the bind key/button? Thanks.

Hey all! I just wanted to post my two cents since I have found hardly any information on spektrum's newest radio. At my local hobby shop, the DX6e caught my eye. Flying mainly with a Turnigy 9XR and a spektrum DX6i, I thought for $150 I would give it a shot. And honestly I love it. My...

Hi, I am really hoping you guys can help me out here because I am going crazy with this. About a week ago I bought a Blade Inductrix BNF and have been using it without any issues with both my DX6 and an MLP4DSM that I have from a Blade MCX2. As of yesterday it refuses to bind on my DX6. It has...

I ordered the KISS fc and the spektrum dsmx satellite reciver with diversity, but I have some questions -In cleanflight, in order to get the satellite reciever to go into bind mode, you had to use the CLI. How can I do this in the KISS fc software? Or will the reciever automatically go into...

I haven't been "new" for a few years. I have been flying RC off and on, since 2001. I started with balsa gliders, and moved into foamy warbirds. I still have gliders but now they climb up on props, and lipos instead of a spool of line bolted to a car starter. I enjoy building as much as I...

I'm new to building drones and I'm planning to build a versa copter v2 I have a spektrum dx6i (upgrading to the dx8 gen2) and don't know what receiver to put on the versa copter. I plan to also use the naze 32 rev6 on the quad. I am also curious what kind of FPV camera people recommend for...

Help! I'm using cleanflight with my naze32 acro on a V2 Versacopter and cannot get cleanflight to recognize my Spektrum serial receiver (DSMX quad race type). I have read all the blogs including CLI commands and feel like I have exhausted those techniques. Any ideas? I've got port 2 set to...

On a tip from a post in the forum I became aware of a deal on new Spektrum transmitters for under $200. I jumped on it. My new transmitter is here and I thought I would document what I find along the way. First off, the deal was from Force RC. I chatted with Horizon Hobby online and spoke with...

So I cannibalized the receiver out of a now scrap quad I built and I am now building a versa. however when trying to connect the naze to the ar, it does one of 2 things. 1) which is nothing, no power at all. 2) it receives power but no communication. when I'm in cleanflight, in the receiver...

I have a spektrum DX6i transmitter and an AR636 reciever, I am following all the undoing steps for the receiver and it won't. Bind. I insert the binding plug, connect the flight battery, then step away at least 6 feet (recommend by Spektrum Support), power on transmitter in bind mode, I get a...

Dx5e not binding to..... anything? [FIXED] Hi, Preface: I am working on a build of the Versa wing and I just got all of my electronics. Excited to try out the new receiver I got, I plugged it into a powered esc and my servos and I flicked on my transmitter, only to find that although it looks...

I've recently done a software update on my Naze32 rev 6 and the motors have become out of sync and are spinning up at different speeds however, when inside cleanflight the motors are in sync. I followed all the steps in josh's video and still they are messed up. I am currently using: flite...

I'm in the middle of my first racing quad build and having problems with my transmitter communicating with the FC. really need some help! Equipment: Emax ESC (Simon K), CC3d FC, Spektrum transmitter and receiver (AR7700). From the start I had issues getting the ESC's to go into program mode. I...

I have a dx6i transmitting to a 25 race quad with a cc3d and a spektrum AR610. the cc3d powers on but the receiver never powers on. i have tried to put a direct 5v. but the receiver never works. when i place voltage to it the light flickers than stops. i have tried putting other receiver on the...

Hello, noob here. I recently completed my first build of a new y6 copter and I have started the installation of my naze board. I have a naze 32 rev 6 board and I have already flashed it. It came with a breakout cable with 8 connections. Can anyone tell me what connection go where on my spektrum...

Ive finished building my mini guinea with the corresponding power pack. I connected all of the servos correctly and connected the second motor to the AUX1 channel on my reliever(spektrum a610). I connect the battery and the esc connected to AUX1 beeps in a pattern like its going through its...