Blackout mini H quad build

[severed]

I'm waiting on batteries to finish charging. It's already been crashed quite a few times in the last two days. Been recording with the Mobious. Should hopefully have some video up later.

 

[C0d3M0nk3y]

Test fit:







With the hardware I'm using, the frame weight is 151 g.

 

[jipp]

is that with metal hardware or the nylon?
it looks cool. ill do not think ill ever get tired of carbon fiber weave pattern.
chris.

 

[C0d3M0nk3y]

is that with metal hardware or the nylon?

I swapped out all of the nylon bolts with aluminum ones.

 

[severed]

I'm sorry it's so long, but here is my first day flying. You can tell I'm just learning. https://www.youtube.com/watch?v=zKF0DooiZt8

 

[jipp]

looks like a good first maiden. you have a nice place to fly. i wish i had a open grass feild like that. all i have is desert. cactus,rocks,dirt,sand. heh.

severd video..

chris.

 

[C0d3M0nk3y]

I'm trying something a little different for motor connections to the FC.





The female servo lead is to connect a servo to tilt the FPV camera. I didn't have enough room to put all 3 pins under the board, and I didn't want them sticking out of the top.

 

[C0d3M0nk3y]

I took the case off of the rx and removed the pins I don't need.

 

[C0d3M0nk3y]

Here's the 5V regulator soldered in place and installed so it will be under the FC.

 

[C0d3M0nk3y]

ESCs soldered in place:



ESC signal wires in a 4 pin header:



vtx power lead soldered in place:

 

[severed]

Lookin good!

 

[C0d3M0nk3y]

Here's a test fit of all the components:



And here's everything in place ready to put the top plate on:

 

[C0d3M0nk3y]

Lookin good!

Thanks!

 

[C0d3M0nk3y]

Here it is all assembled.



And with a GoPro mounted.



I'll get some better photos tomorrow.

 

[severed]

Can't tell, what is the servo for?

 

[C0d3M0nk3y]

Can't tell, what is the servo for?

For tilting the FPV camera. I took parts of the design from FGA and parts from Vegetoast.

 

[severed]

I'd love to do that, but I have no room with my current layout.

 

[C0d3M0nk3y]

The weight of the frame with no camera or battery came out to 419 g.



With a GoPro, it's 500 g.



And a nano-tech 3S 1300 45C battery brings the all up weight to 619 g.

 

[Twitchity]

Nice build like always. It looks like you will have plenty of new toys to play around with once the weather gets better for you.

 

[C0d3M0nk3y]

Nice build like always. It looks like you will have plenty of new toys to play around with once the weather gets better for you.

Thanks. Yes, I think I have enough to keep me busy for a while.