C0d3M0nk3y
Posted a thousand or more times
I'm building a mini hex using a frame from Twitchity. This is the third version of his mini hex frame. Mine is made of G10.
Initial specs:
MK 6: Twitchity mini hex v3
motors: Cobra 2204/28 2300 KV
ESCs: KISS 18A
FC: Naze32 acro rev5
RX: FrSky X4R-SB
telemetry: FrSky SP-FLVS
props: HQ 6x3
battery: nano-tech 3S 1800 mAh 65C
5V regulator: Pololu 2107
camera: Mobius wide angle
motor to motor distance: 335 mm
all up weight: 775 g
Current specs:
MK 6: TwitchFrames mini hex v3
motors: Cobra 2204/32 1960 KV
ESCs: DYS SN20a (BLHeli)
FC: RMRC Dodo (Cleanflight)
RX: FrSky X4R-SB
telemetry: FrSky FBVS-01
props: HQ 6x4.5
battery: nano-tech 4S 2250 mAh 65C
camera: GoPro HERO3+ Black
FPV TX: ImmersionRC 5.8 GHz 600 mW
FPV antenna: ImmersionRC 5.8 GHz SpiroNET
motor to motor distance: 335 mm
all up weight: 979 g
Initial specs:
MK 6: Twitchity mini hex v3
motors: Cobra 2204/28 2300 KV
ESCs: KISS 18A
FC: Naze32 acro rev5
RX: FrSky X4R-SB
telemetry: FrSky SP-FLVS
props: HQ 6x3
battery: nano-tech 3S 1800 mAh 65C
5V regulator: Pololu 2107
camera: Mobius wide angle
motor to motor distance: 335 mm
all up weight: 775 g
Current specs:
MK 6: TwitchFrames mini hex v3
motors: Cobra 2204/32 1960 KV
ESCs: DYS SN20a (BLHeli)
FC: RMRC Dodo (Cleanflight)
RX: FrSky X4R-SB
telemetry: FrSky FBVS-01
props: HQ 6x4.5
battery: nano-tech 4S 2250 mAh 65C
camera: GoPro HERO3+ Black
FPV TX: ImmersionRC 5.8 GHz 600 mW
FPV antenna: ImmersionRC 5.8 GHz SpiroNET
motor to motor distance: 335 mm
all up weight: 979 g
Last edited: